A new pavement design software, which is the only one able to optimize the slabs sizes less than 10ft, has been launched recently. OptiPave2TM software is specifically tailored to design short-jointed concrete pavements for any set of climate, traffic, subgrade/subbase layer, and material property inputs including the addition of macro-fibers.. The software calculates stresses, using a neural network system developed on runs of Islab2000TM. It is based on the fatigue damage equations of the project NCHRP 1-37° (NCHRP 2006), joint faulting using the energy differential model and IRI. This mechanical-empirical design software was calibrated using full scale test sections and a study conducted on the University of Illinois . TCP designs include unbonded concrete pavement over granular or stabilized base layers. Typical slab sizes for TCP are between 4.5 ft to 8 ft long by 6 ft wide with slab thickness ranging from 60 mm to 250 mm depending on traffic, climate, and soil conditions. Some of is features are:
o Either it calculate the thickness or evaluate the distress of a given structure
o Traffic analysis by Load Spectra or Equivalent Axles
o Up to six supporting layers characterization
o It allows the user to design plain or fiber reinforced concrete pavements.
o Two Units System (English and metric) and multi-language
· It computes:
o It computes Three types of cracking (Transversal, Longidunial, Corner Cracking), Mean Joint Faulting and mean IRI
We made a technical visit to the recently built Ruta 7, Cerro Castillo - Laguna Verde project. ...
In September, a technical visit was made to the section of the international route between ...
In the month of May 2019, there was a technical visit to the pavement of a brewing ...